Logo

The 14th International Modelica Conference
Linköping, September 20-24, 2021

[Practical Information] [Tutorials and Vendor Sessions] [Proceedings] [Modelica Libraries] [FMI User Meeting] [Archives] [Journal Special Issue (open for submissions until 2022-07-31)]

Papers by Stephan Göbel

Title: Underfloor heating system model for building performance simulations
Authors: Stephan Göbel, Elaine Schmitt, Philipp Mehrfeld and Dirk Müller
Abstract: The efficiency of heat pump systems is highly dependent on the temperature gap between the sink and the source side. Therefore, it is necessary to accurately model the sink side to enable the most accurate and holistic analysis of building energy systems. In both residential and non-residential buildings, underfloor heating systems are becoming more and more widely used. Their application can reduce the flow temperature of the heating system compared to a radiator and thus increase the efficiency of a heat pump system. This paper provides an underfloor heating system model including automatic parametrization according to prEN 1264-3:2020-02. Since the model represents a whole underfloor system, it consists at the system level of the distributor and several heating circuits and takes at the smallest level the heat transfer from a pipe element through different floor layers into account. The model is verified for the system requirements according to prEN 1264-2:2020-02. A parameter study with a variety of different underfloor heating parameters and floor layers shows that reductions of heat transfer in the underfloor heating system are compensated primarily by increasing the supply temperature. The highest influence on the temperature level of the system is exerted by the pipe spacing T, which raises the flow temperature by up to 10.9 K, from 36.6 °C (T = 100 mm) to 47.5 °C (T = 400 mm). The model is freely available on GitHub: https://github.com/RWTHEBC/AixLib/tree/issue890_HOMProject_FloorHeating
Keywords: Building performance simulation, EN 1264, automatic parametrization
Paper: full paper Creative Commons License
Bibtex:
@InProceedings{modelica.org:Gobel:2021,
  title = "{Underfloor heating system model for building performance simulations}",
  author = {Stephan G\"obel and Elaine Schmitt and Philipp Mehrfeld and Dirk M\"uller},
  pages = {343--349},
  doi = {10.3384/ecp21181343},
  booktitle = {Proceedings of the 14th International Modelica Conference},
  location = {Link\"oping, Sweden},
  editor = {Martin Sj\"olund and Lena Buffoni and Adrian Pop and Lennart Ochel},
  isbn = {978-91-7929-027-6},
  issn = {1650-3740},
  month = sep,
  series = {Link\"oping Electronic Conference Proceedings},
  number = {181},
  publisher = {Modelica Association and Link\"oping University Electronic Press},
  year = {2021}
}